• Welcome to AG Electronics

    Ultrosonic Sensors

  • Welcome to AG Electronics

    RADAR Sensors

  • Welcome to AG Electronics

    Ultrosonic Controllers

  • Welcome to AG Electronics

    Parking Sensors


The proximity warning system for HEMM consists of AG02RADS small sensor modules and AG02RC01 display module. (X = 01 - 04 max is the number of sensor modules). The multiple sensor modules (up to 4) can be connected to a display module.

The small sensor module provides very short to long-range detection and ranging, in an extra compact, robust ABS plastic/MS housing, designed to resist water intrusion. This sensor has a serial/pulse-width output along with real-time auto calibration for changing conditions (temperature, voltage or electrical noise) ensuring reception of the most reliable (in air) ranging data for every reading taken. The low power operation detects objects up to 20 meters and provides range information with LEDs. Audio alert is also provided; audio sound alert varies with the sensing distance. The interface output format is pulse-width/serial output.


  • Extra Compact Housing
  • Low power
  • Designed for outdoor or indoor environments
  • Real-time auto calibration and noise rejection for every ranging cycle
  • Precise H/W beam
  • Continuously variable gain
  • Object detection includes soft target objects
  • +10-30VDC supply for Display Module.
  • Free run operation can continually measure output range information
  • Triggered operation provides the range reading as desired
  • All interfaces are not active simultaneously (thus avoiding cross-talk)
  • Serial, 0 to +5V, 9600Baud, 8,1,N or Pulse-width output
  • Sensor operates in dusty/rainy conditions
  • Option to operate in continuous or short-time mode (e.g. 5 minutes at start-up)
  • Audio Buzzer indication (variable rate) for proximity warning.


Sensing Range Up to 20 meters
Number of Sensors 1 to 4 depending on the Vehicle
Operating Frequency 2440 MHz (+/- 40 MHz) ISM band
EIRP power < 1 Watt (< 30 dBm)
Power Supply 10 VDC to 30 VDC (200 mA max.)
Min. Receive Sensitivity -75dB
Beam width 80°/40°
Operating Temperature 0°C to 70°C
Noise cancellation Provide
  • Designed as per industrial/mining conditions. Can be used in dusty and humid conditions.
  • Separate sensor and display module (multiple sensors can be connected to display module).
  • Micro-controller present in each sensor. This provides better calibration and communication with display module.
  • Single cable interface makes it easy to connect in field.
  • Easy mounting

Download - Datasheet Radar